Battery Never flown, just too heavy for my multirotor as it pushed it over payload weight.

Battery was charged, then charged to storage capacity, and I left the Velcro attached on the bottom.

Specs:
Capacity: 10000mAh
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 15C Constant / 30C Burst
Weight: 936g (including wire, plug & case)
Dimensions: 168x69x40mm
Balance Plug: JST-XH
Discharge Plug: XT90

Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through duration of use.
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life 600+
• Graphene LiPo Batteries only require a standard LiPo battery charger.

$35 pickup or $55 shipped

PayPal Preferred